Owl Overland Van Recovery kit

Overview: Tackle the trail with confidence with the Owl Vans Offroad Recovery Kit — assembled specifically for adventure vans. Whether you're overlanding deep into remote terrain or just need peace of mind on the backroads, this all-in-one recovery kit has the equipment you need to get unstuck and keep moving.

Features & Benefits:

• LEATHER GLOVES: Mechanix Leather FastFit Gloves.
  
• MODULAR MOLLE ROLLUP BAG: Roll-up design w/ compression straps. Labelled accessory bags. Metal buckles or zippers. Glove storage pocket on bag exterior.
  
• 20’ KINETIC ROPE: Do not exceed 5 mph during use. Ensure the Minimum Breaking Strength of a Kinetic Rope is greater than 3X the GVWR of the vehicle doing the pulling. Only use with rated vehicle recovery points. If two offset front or rear vehicle recovery points are available, use with a Bridle to spread the load across both points.
  
• 10’ TREE SAVER: Sized to be used as the primary component for a static recovery pull. Can be used as one leg of a V-Bridle, or as an extension for Owl’s Kinetic Rope. Can also be used as a Tree Saver Anchor for up to a 12,000 lb Winch, even on the anchor side of a pulley block. Always ensure all slack is removed from a sling/strap prior to attempting a Static Pull.
• 20’ HMPE BRIDLE: Also strong enough to be used as an extension for Owl’s Kinetic Rope. Can be used as a Winch Line Extension for up to a 12,000 lb Winch, even on the anchor side of a pulley block. Follow User Guide instructions for proper use.
  HMPE SOFT SHACKLE: With a 47,000lb Minimum Breaking Strength, it is strong enough for use in all vehicle recovery points listed on Owl’s Static, Kinetic (Dynamic) and Winching User Guides - to include at the anchor end of a pulley block with up to a 12,000 lb Winch.
• HITCH MOUNTED RECOVERY POINT: Machined Aluminum with radiused edges & oversized opening for optimal soft shackle compatibility. Anodized Black, engraved with critical dimensional and strength rating data.
  BARREL HEAD HITCH PIN: 3” usable length. Class III/IV Rating. Stainless Steel Construction. No cotter pin needed.
• X-LOCK: Machined from Aerospace Grade Aluminum. Follow User Guide instructions when using an X-Lock. Do not use an X-Lock with a jacketed (double braid) rope.
  USER GUIDE: Owl’s Static/Kinetic(Dynamic) Vehicle Recovery User Guide is printed on a single sheet of Weatherproof, tear-resistant plastic paper for max durability. Graphics provide clear guidance regarding the proper layout of all fundamental vehicle recovery configurations.
• OWL MAGNETIC MEDALLION: Owl’s 2.25” diameter Magnetic Medallion prominently features a beautifully rendered Owl logo on one side and (8) seated neodymium magnets on the other, enabling this sharp looking badge to be magnetically affixed to any ferrous surface.